本电吸收调制光发射机评估板可用于诸如-NRZ/OOK 光信号的生成. 主板集成了EML激光器, 温度和功率恒定控制, 单电压供电, **小的尺寸, 较简的用户界面, 使得它非常适合实验和开发人员在实验室调试或二次开发使用, 且******.
DESCRIPTION
The EML (Electro-absorption Modulated Laser) transmitter evaluation board consists of a conventional Distributed Feed-Back (DFB) laser and EA modulator. The modulation ** is applied to the modulator section while the laser section operates CW allowing extremely low wavelength chirping. The module includes an optical isolator, monitor photodiode, thermistor and a thermo-electric cooler.
FEATURES
Dynamic extinction ratio >=10 dB
Low drive voltage
Up to 20km transmission capability
APPLICATIONS
Optical transmission
Microwave photonics
Testing and measurement
Parameters | Unit | Min. | Typ. | Max. |
Operating Wavelength | nm | – | 1550 | – |
Wavelength Accuracy | nm | – | 2 | – |
3dB Electrical Bandwidth | GHz | 10 | – | 32 |
DC On/Off Extinction Ratio | dB | 15 | 18 | – |
Dynamic Extinction Ratio | dB | 10 | – | – |
Optical Power | dBm | 0 | 5 | 7 |
Optical Isolation | dB | 25 | 30 | – |
Side-mode Suppression Ratio | dB | 30 | – | – |
Maximum Data Rate | Gbps | 10 | – | 40 |
EA Modulator DC Offset | V | 0 | – | -1 |
RF Drive Voltage Swing | Vpp | – | – | 2.7 |
Modulation Format/Application | – | NRZ/OOK | ||
Adjustable Parameter | – | Optical Power ; TEC Temperature ; | ||
Adjustment Interface | – | Trimming Potentiometer, Manual | ||
Receiver Option | – | Board Integrated Photo-Receiver | ||
RF Input Port | – | GPO Male, or GPPO Male | ||
Optical Fiber @Output | – | SM28-e, FC/APC | ||
Operating Temperature | ℃ | 0 ~50 | ||
Power supply* | – | DC12V, 0.5A (EVB) | ||
Dimensions (L×W×H)* | mm | 96×96×30 (EVB) |
Notes:
*The specifications subject to change without notice.
*The appearance and the key component varies according to different performance requirements.